ABB
Fiber Optic Modem Modules ABB Protection and Control AFO4LE 1KHL015545R0001
Manufacturer: ABB
Product No.: AFO4LE 1KHL015545R0001
Product Type: Fiber Optic Modem Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 110g
Shipping port: Xiamen
Warranty: 12 months
The ABB AFO4LE 1KHL015545R0001, also cataloged as the AFO4LE Fiber Optic Modem Module, operates as a dedicated hardware component for optical-to-electrical signal conversion within localized substation automation network platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AFO4LE 1KHL015545R0001 |
| Brand | ABB |
| Origin | Switzerland |
| Weight | 0.35 kg |
| Dimensions | 130 mm x 40 mm x 105 mm |
| Operating Temp | -25 to 70 deg C |
| Power Consumption | 2.5 W |
| Optical Interface | ST Connectors, multi-mode fiber link |
| Transmission Wave length | 820 nm |
Profinet / EtherNet/IP Deterministic Networks and Interface Sync
The physical hardware architecture interfaces with serial and Ethernet configurations, ensuring compatibility across Profinet / EtherNet/IP deterministic networks. The module executes signal processing without buffering delays, sustaining full backplane bus communication velocity and preventing packet collision during synchronous data routing. Onboard EEPROM components enforce strict firmware flash compatibility across designated industrial transmission stations to protect operational consistency.
Frequently Asked Questions
Q: Does this transceiver card support live replacement or hot-swap actions while energized?
A: No. Power connection termination blocks must be fully decoupled prior to the physical insertion or extraction of the hardware to prevent transceiver interface failure or optical component damage.
Q: How is signal alignment validated across the fiber interface channels?
A: Optical power budget levels must be measured at the receiver ports using a standard meter to ensure the attenuation remains within the designated multi-mode limits for error-free data transfer.
Field Installation Guidelines
- Mount the unit onto a standard 35 mm DIN-rail assembly, ensuring the grounding clip seats firmly against the metal sub-panel surface.
- Clean all optical fiber face surfaces using specialized cleaning tools prior to locking the ST connectors into the receiver channels.
- Maintain the minimum bend radius constraints specified for the fiber optic patch cables to prevent mechanical stress and signal attenuation.
- Secure all low-voltage power supply wiring to the terminal block using a torque value matching standard factory definitions.
Return policy
We aim to provide reliable products and a smooth purchasing experience. If there is a problem with your order, please contact us and we will assist according to our Refund Policy.
Shipping
We provide international shipping options to meet different delivery requirements. Please review details regarding methods and timelines in our Shipping Policy.
Warranty
We provide a 12-month warranty for all products, subject to normal use and proper installation.
You may also like
Product Guide
Mitigating SCADA Performance Drops During Shift Transitions
Mitigating SCADA Performance Drops During Shift Transitions
Optimizing SCADA Performance: Why Remote Clients Experience Lag
Optimizing SCADA Performance: Why Remote Clients Experience Lag