GE Fanuc IC698ACC701 Auxiliary Smart Battery Module

Product Summary

The IC698ACC701 is an Auxiliary Smart Battery Module for the PACSystems RX7i (and compatible RX3i) CPU platforms. It provides extended backup power for user memory (RAM) and the real-time clock during power outages. The module includes integrated monitoring circuitry for low-battery indication.

Core Specifications

• Model Number: IC698ACC701
• Module Type: Auxiliary Smart Battery Module
• Compatible Systems: PACSystems RX7i and RX3i CPUs
• Battery Chemistry: Lithium (non-rechargeable)
• Nominal Voltage: 3.0 V
• Capacity: Approximately 3000 mAh (3 cells)
• Lithium Content: 5.1 g total (1.7 g per cell)

Electrical & Performance Characteristics

• Maximum Current Rating: 15.0 A (peak)
• Battery Life (typical): Up to 200 days (when CPU is unpowered)
• Shelf Life: Up to 7 years
• Diagnostics: Smart battery monitoring with low-battery alerts reported to the CPU
• Connectors: 4-pin female JAE connector (embedded) with factory-supplied 4-pin male to 2-pin female adapter cable

Installation Guide

1. Power off the RX7i CPU and open the battery compartment door.
2. Install the new IC698ACC701 module, ensuring proper orientation and connector seating.
3. Connect the battery cable to the CPU battery connector (use adapter if required).
4. Close the battery door securely (replace door if the CPU lacks the appropriate notch).
5. Power on the system and verify battery status through CPU diagnostics or programming software.

Replace the battery before the low-battery warning to prevent data loss. Dispose of used batteries according to local regulations for lithium batteries.

Selection Guidelines

• Use IC698ACC701 for extended memory backup in RX7i CPUs requiring high-capacity auxiliary power.
• Verify compatibility with specific CPU model (e.g., IC698CPE010, IC698CPE020, IC698CRE020).
• For standard (non-auxiliary) battery requirements, refer to CPU-specific battery kits.