GE Fanuc Series 90-30 IC693CBL327 Terminal Block Quick Connect Cable

Product Overview

The GE IC693CBL327 is a 3-meter I/O expansion cable for the GE Fanuc Series 90-30 PLC platform. Featuring a left-side 24-pin 90-degree connector, this shielded cable connects the CPU or communication module to remote I/O racks, expansion bases, or distributed I/O modules. It is essential for extending the Series 90-30 I/O bus beyond the main rack, enabling flexible system layout in large control panels or multi-cabinet installations.

Key Specifications

• Part Number: IC693CBL327
• Product Type: I/O Expansion Cable
• Series: GE Fanuc Series 90-30
• Cable Length: 3 meters (9.84 feet)
• Connector Type: One 24-pin 90-degree (right-angle) connector (left side)
• Shielding: Shielded for EMI protection
• Application: I/O rack expansion / remote I/O bus extension
• Compatibility: Series 90-30 CPU modules, expansion modules, and remote I/O interfaces

Features & Benefits

• 90-Degree Connector: Right-angle design saves space in crowded control cabinets
• Shielded Construction: Reduces electromagnetic interference for reliable data transmission
• Left-Side Orientation: Designed for left-side module connections in rack configurations
• 3-Meter Reach: Provides adequate length for most intra-cabinet or adjacent-cabinet connections
• OEM Quality: Manufactured to GE specifications for signal integrity and durability

Applications

• Series 90-30 I/O rack expansion in manufacturing lines
• Remote I/O nest connections in water treatment plants
• Multi-cabinet PLC installations in power substations
• Material handling system distributed I/O wiring

Installation Guide

1. Power Down: Turn OFF all rack power supplies before connecting or disconnecting expansion cables
2. Identify Connector Side: The IC693CBL327 has a left-side 90-degree connector — verify orientation matches your module layout
3. Connect to CPU/Interface: Insert the 24-pin connector into the expansion port on the CPU or bus transmitter module
4. Route Cable: Use cable trays or conduit to protect the cable from mechanical damage and EMI sources
5. Connect to Remote Rack: Attach the opposite end to the expansion receiver module on the remote I/O rack
6. Secure Connections: Ensure connector screws are tightened to prevent vibration loosening
7. Power Up & Test: Restore power and verify remote I/O rack communication via programming software

FAQ

Q: What is the difference between IC693CBL327 and IC693CBL328?
A: The CBL327 has a left-side 90-degree connector, while the CBL328 has a right-side 90-degree connector. Choose based on your module mounting orientation.

Q: Can I use this cable for Genius bus connections?
A: No, this cable is for Series 90-30 I/O bus expansion only. Genius bus uses different cable types (e.g., IC660BLC001).

Q: What is the maximum cable length for I/O expansion?
A: GE specifies maximum expansion cable lengths based on the module and configuration. Consult the GFK-0467 Series 90-30 installation manual for exact limits.

Q: Are longer cables available?
A: Yes, GE offers various lengths. The IC693CBL313 provides 8 meters for longer runs. For custom lengths, contact your distributor.

Selection Tips

• Verify left-side vs right-side connector orientation before ordering — swapping requires reordering
• Measure the exact cable run distance and add 20% slack for service loops
• Use shielded cables exclusively in high-EMI environments (near VFDs, welding equipment)
• For dual-connector cables (both ends 90-degree), consider IC693CBL329/330/331/332 series
• Label both ends of the cable during installation to simplify future troubleshooting