General Electric IS230JPDGH1B DC Power Distribution Module

Product Overview

The GE IS230JPDGH1B is a 28 VDC Power Distribution DIN Rail Module for Mark VIe control systems. It provides stable, reliable DC power distribution to various electronic devices, including PLCs, inverters, sensors, and I/O modules. Featuring dual power input support, over-current protection, and modular DIN rail mounting, it ensures high system redundancy and easy maintenance in industrial automation and power generation applications.

Key Specifications

• Model: IS230JPDGH1B
• Type: DC Power Distribution DIN Rail Module
• Series: Mark VIe
• Input Voltage: 28 VDC
• Output Voltage: 28 VDC
• Output Current: Varies by configuration (supports multiple loads)
• Mounting: Standard DIN rail
• Power Inputs: Dual input support for redundancy
• Protection: Over-current protection
• Modular Design: Hot-swappable, supports system expansion
• Dimensions: Standard DIN rail module size
• Weight: ~0.5 kg

Environmental Specifications

• Operating Temperature: -20°C to +70°C
• Storage Temperature: -40°C to +85°C
• Humidity: 5% to 95% RH (non-condensing)

Installation Guide

1. Mount the IS230JPDGH1B on a standard 35 mm DIN rail in the control cabinet.
2. Connect primary and redundant 28 VDC power sources to the input terminals.
3. Distribute power to downstream modules (I/O packs, sensors, actuators) via output terminals.
4. Verify over-current protection settings match connected load requirements.
5. Monitor power status via system diagnostics and check for fault indications.

FAQ

• Q: What is the advantage of dual power inputs?
  A: Dual inputs allow redundant power feeds; if one source fails, the other maintains power to critical loads without interruption.
• Q: Can this module be hot-swapped?
  A: Yes, the modular DIN rail design supports replacement without shutting down the entire system, provided proper bypass procedures are followed.
• Q: What protection does it offer?
  A: Built-in over-current protection prevents damage to downstream devices during short-circuit or overload conditions.

Selection Tips

• Specify IS230JPDGH1B for Mark VIe systems requiring organized 28 VDC power distribution.
• Calculate total load current to ensure the module capacity is not exceeded.
• Deploy dual-redundant power feeds for mission-critical I/O and controller modules.

Data Source: Parameters based on WOC and distributor specifications. Detailed electrical ratings and wiring diagrams should be verified against GE Mark VIe power distribution documentation.