Honeywell Series C CC-PAON01 51410070-175 Analog Output (AO) Module

Overview

The Honeywell CC-PAON01 51410070-175 is a 16-channel Non-HART High-Level Analog Output (AO) module designed for the Experion Series C I/O platform. It delivers high-level constant current to actuators and recording/indicating devices directly from the C300 controller, configured without HART pass-through requirements.

Technical Specifications

• Input / Output Model: CC-PAON01 - High-Level Analog Output Non-HART
• Part Number: 51410070-175
• Manufacturer: Honeywell
• Document Source: Experion Series-C I/O Specification (EP03-490-520_V10_SCIO_1_5)
• Output Type: 4-20 mA
• Output Channels: 16
• Output Ripple: < 100 mV peak-to-peak at power line frequency, across 250 Ω load
• Output Temperature Drift: 0.005% of Full Scale/°C
• Output Readback Accuracy: ±4% of Full Scale
• Output Current Linearity: ± 0.05% of Full Scale nominal
• Resolution: ± 0.05% of Full Scale
• Calibrated Accuracy: ± 0.35% of Full Scale (25°C) including linearity
• Directly Settable Output Current Range: 0 mA, 2.9 mA to 21.1 mA
• Maximum Resistive Load (24 V supply = 22 VDC through 28 VDC): 800 ohms
• Maximum Output Compliant Voltage (24 V supply = 22 VDC through 28 VDC): 16 V
• Maximum Open Circuit Voltage: 22 V
• Response Time (DAC input code to output): Settles to within 1% of final value within 80 ms
• Gap (0 mA) of Output to Field on Switchover: 10 ms maximum (applies to Redundancy only)
• Optional Redundancy: Supported
• Non-incendive Output: Supported

Compatible Module Termination Assemblies (IOTA Models)

• CC-TAOX01: Non-Redundant 6” IOTA assembly
• CC-TAOX11: Redundant 12” IOTA assembly
• CC-GAOX11: Redundant 12” IOTA assembly (Conformally Coated)
• CC-GAOX21: Non-Redundant 6” IOTA assembly (Conformally Coated)

Key Operational Features

• FAILOPT Behavior: Supports the FAILOPT parameter on a per-channel basis. The user can configure each channel to either HOLD LAST VALUE or SHED to a SAFE VALUE. The Output will always go to zero, the safe state, if the IOM device electronics fails.
• Open-wire Detection: Able to detect and annunciate open field wire with a Channel Soft Failure indication.
• Output Read-back: Features output read-back and alarm on tracking discrepancy detection.

Installation Notes

• Insert the CC-PAON01 module onto its matched IOTA slot allocation (CC-TAOX01, CC-TAOX11, CC-GAOX11, or CC-GAOX21) inside the control cabinet enclosure.
• Ensure that total external field loop resistance, including wire resistance and control valve positioner internal load, does not exceed the 800 Ω maximum threshold.
• Verify that the maximum open circuit voltage stays bounded at 22 V under full operational testing.
• Define individual channel FAILOPT behaviors (Hold Last Value or Safe Value target) inside the control network manager environment before executing C300 controller logic down-loads.