Honeywell TDC 3000 51400604-100 5-Slot Module Rack Chassis

Product Overview

The Honeywell 51400604-100 is a 5-Slot Module Rack Chassis engineered for the Honeywell TDC 3000 and TotalPlant Solution (TPS) Distributed Control Systems (DCS). It provides the physical infrastructure and high-speed backplane connectivity required for Process Managers (PM), Advanced Process Managers (APM), and specialized interface cards.

Key Specifications

• Manufacturer: Honeywell
• Part Number: 51400604-100
• Product Type: 5-Slot Module Rack / Chassis File
• System Compatibility: Honeywell TDC 3000, TPS, PM, APM
• Slot Capacity: 5 Universal Module Slots
• Backplane Function: Data bus and power distribution
• Mounting: 19-inch rack-mount or panel-mount
• Power Rails: +5V, +12V DC via system power cables
• Construction: Industrial-grade metal, EMI/RFI shielded
• Operating Temperature: 0°C to +60°C (32°F to 140°F)
• Storage Temperature: -40°C to +85°C
• Humidity: 5% to 95% RH (non-condensing)

Applications

• Oil refineries and petrochemical plants
• Chemical processing facilities
• Power generation control nodes
• Legacy Honeywell DCS retrofits and expansions

FAQ

Q: What modules can be installed in this chassis?
A: The 5 universal slots accept PM, APM, communication, and I/O interface modules designed for the TDC 3000/TPS backplane architecture.

Q: Is this chassis CE compliant?
A: It meets industrial EMC and safety standards for process control equipment. Verify specific regional certifications with your local Honeywell representative.

Q: Can I use this chassis for redundant controller configurations?
A: Yes, the backplane supports redundant PM/APM pairs when populated with the appropriate redundancy driver modules.

Installation Guide

1. Mount the chassis in a standard 19-inch industrial cabinet using the provided brackets.
2. Connect system power cables to the backplane power input terminals.
3. Install modules starting from the leftmost slot, ensuring proper alignment with the backplane connectors.
4. Secure each module with the retaining screws to prevent vibration-induced disconnections.
5. Verify power rail voltages (+5V, +12V) before energizing connected modules.

Selection Tips

• Confirm your existing system uses the TDC 3000 or TPS architecture before ordering.
• For larger I/O counts, consider the 10-slot chassis variant (e.g., 51400919-100 series).
• Always pair with an appropriate power supply module rated for the total slot load.
• Check module revision levels to ensure backplane compatibility.