New Woodward 5437-080 NetCon Field Terminal Module

Woodward 5437-080 NetCon Field Terminal Module (FTM)

The Woodward 5437-080 is a Field Terminal Module (FTM) for NetCon governor and digital control systems. It serves as the interface between field wiring and NetCon I/O modules, providing secure termination points, signal conditioning, and protection for control system inputs and outputs.

Key Specifications

• Part Number: 5437-080
• Product Type: Field Terminal Module (FTM)
• Series: NetCon Governor / NetCon 5000
• Manufacturer: Woodward, Inc.
• Function: Field wiring termination and signal interface for NetCon I/O
• I/O Capacity: Medium density, typically 256–2048 point range (system-dependent)
• Structure: Modular, hard PLC processor-based
• Mounting: Control room / panel installation
• Operating Temperature: 0°C to 60°C (typical)
• Humidity: 5% to 95% non-condensing
• Compatibility: NetCon 5000, 501, 503, 509 series controllers

Features & Benefits

1. Signal Conditioning: Provides filtering and isolation between field devices and sensitive I/O electronics.
2. Modular Architecture: Hot-swappable design allows module replacement without rewiring field cables.
3. High-Density Termination: Compact design maximizes I/O density in control panels.
4. Industrial Durability: Withstands vibration, temperature extremes, and electrical noise in power generation environments.

Applications

• NetCon governor system field wiring interface
• Gas turbine and steam turbine I/O termination
• Compressor and pump control panels
• Power generation plant automation

FAQ

Q: Does the 5437-080 include active electronics?
A: The 5437-080 is primarily a passive termination module with some signal conditioning. Active processing occurs in the associated I/O modules.

Q: Can I use 5437-080 with 2301 or 505 governors?
A: The 5437-080 is designed for NetCon systems. For 2301 or 505 governors, use their respective terminal assemblies.

Installation Guide

1. Mount the 5437-080 FTM in the control panel adjacent to the NetCon chassis.
2. Connect field wires to the terminal block per the wiring schedule.
3. Link FTM to NetCon I/O modules via internal ribbon cables or backplane connectors.
4. Verify all shield grounds are properly bonded.
5. Power on and verify I/O channel functionality through NetCon diagnostics.

Selection Tips

• I/O Density: Confirm your application requires medium-density termination (256–2048 points) vs. high-density alternatives.
• Signal Type: Verify FTM supports your mix of analog, discrete, and relay signals.
• Replacement: If 5437-080 is obsolete, inquire about Woodward's current FTM replacement recommendations.