SAED5D | Yokogawa Terminal Board (Digital Signal)

Product Overview

The SAED5D is a digital signal terminal board for the Field I/O (FIO) subsystem of Yokogawa CENTUM VP systems. It provides reliable field wiring connections for digital input/output modules such as ADV151 and ADV551.

Key Features

• 32 points per set
• M4 screw terminals
• Protects connector pins and prevents dust accumulation
• High insulation resistance (≥100 MΩ at 500 V DC)
• Supports single and dual-redundant configurations

Technical Specifications

• Number of Points: 32
• Terminal Type: M4 screws
• Compatible Modules: ADV151, ADV551, ADV161, ADV561
• Insulation Resistance: ≥100 MΩ at 500 V DC
• Withstanding Voltage: 500 V AC for 1 minute
• Weight: Approximately 1.5 kg
• System: CENTUM VP FIO subsystem

FAQ

• What modules does it connect to? Digital I/O modules such as ADV151 and ADV551.
• Is it suitable for redundant systems? Yes, two sets are required for dual-redundant configurations with ADV161/ADV561.
• What cable is typically used? AKB337 or equivalent for 64-point setups.

Installation Guide

1. Mount the terminal board in the designated FIO location.
2. Connect the signal cable (AKB331 or AKB337) to the digital I/O module.
3. Terminate field wiring on the M4 screw terminals according to the channel map.
4. Ensure proper grounding and insulation.
5. Verify continuity and system recognition after power-up.

Selection Tips

• Choose SAED5D when a dedicated digital signal terminal board is required for CENTUM VP FIO.
• Confirm compatibility with the specific ADV-series module and cable length needs.
• Order additional sets for redundant configurations.