Schneider BMXAMO0210 2-Ch Isolated High-Level Analog Output

Product Overview

The Schneider Electric BMXAMO0210 is a 2-channel isolated high-level analog output module for the Modicon X80 platform. It provides configurable voltage and current outputs with 15-bit + sign resolution for precise actuator control.

• Analogue Output Number: 2 isolated channels
• Output Types: 0...20 mA, 4...20 mA, ±10 V
• Analogue Output Resolution: 15 bits + sign
• Conversion Time: ≤ 1 ms
• Load Impedance: ≤ 600 Ω (current) / ≥ 1000 Ω (±10 V)
• Measurement Error: ≤ 0.2 % FS (0...60 °C) / 0.1 % FS at 25 °C
• Temperature Drift: 30 ppm/°C
• Isolation Voltage: 750 V DC between channels; 1400 V DC channels to ground/bus
• Detection: Open circuit (current ranges) / Short circuit (±10 V)
• Fallback Mode: Configurable or predefined
• Status LEDs: RUN (green), channel diagnostic (green), ERR (red), I/O (red)
• Net Weight: 0.144 kg
• Power Consumption: Typical 2.1 W at 24 V DC / 0.35 W at 3.3 V DC
• Operating Temperature: 0...60 °C

Key Features

• Channel isolation for improved signal integrity
• Factory calibrated with low drift
• Open-circuit and short-circuit detection
• Compatible with Modicon M340 and M580

FAQ

• What output ranges are available? 0-20 mA, 4-20 mA and ±10 V.
• Is the module isolated? Yes, between channels and to the bus/ground.
• What is the maximum conversion time? ≤ 1 ms.
• Does it support fallback? Yes, configurable or predefined fallback modes.

Installation Guide

1. Mount the module in an X80 rack slot and secure.
2. Connect the 20-way terminal block.
3. Wire loads observing load impedance limits for voltage or current mode.
4. Configure output type and fallback behavior in the programming software.
5. Check status LEDs and perform loop checks before process startup.

Selection Tips

• Choose BMXAMO0210 for applications needing isolated analog outputs with fast response.
• Verify load impedance matches the selected range (current ≤600 Ω, voltage ≥1 kΩ).
• For higher channel count, consider 4-channel alternatives in the X80 family.
• Use hardened (H) version for severe environmental conditions.