Schneider Electric BMXFTB2000 Cage Clamp Terminal Block

Product Overview

The Schneider Electric BMXFTB2000 is a 20-pin removable cage clamp terminal block for the Modicon X80 automation platform. It provides reliable field wiring termination using cage clamp technology for X80 series I/O modules equipped with 20-pin removable interfaces.

Key Specifications

• Terminal Count: 20 removable cage clamp positions
• Wire Capacity: 1 x 0.34 to 1 mm² per terminal
• Platform: Modicon X80 automation platform
• Connection Type: Cage clamp (spring-less design)
• Product Weight: 0.075 kg
• Compliance: RoHS compliant

Features and Benefits

• Cage clamp design provides consistent contact pressure for reliable connections
• Removable architecture enables module replacement without disturbing field wiring
• Single conductor per terminal simplifies wiring documentation and troubleshooting
• Compact form factor integrates seamlessly with Modicon X80 I/O modules
• Engineered for industrial environments with vibration and temperature fluctuations

Applications

• Modicon X80 PLC I/O wiring in industrial control panels
• Discrete and analog module field connections
• Manufacturing automation systems requiring reliable terminal connections
• Process control installations with standard-density I/O requirements

FAQ

Q: What is the difference between BMXFTB2000 and BMXFTB2010?
A: BMXFTB2000 uses cage clamp terminals accepting 1 x 0.34..1 mm², while BMXFTB2010 uses screw clamp terminals accepting 1 or 2 x 0.34..1.5 mm².

Q: Does this terminal block support two wires per position?
A: No. The BMXFTB2000 accepts one conductor per terminal position.

Q: What tools are required for installation?
A: A standard flat-blade screwdriver is required to open the cage clamps for wire insertion.

Installation Guide

1. De-energize the system before handling terminal blocks
2. Strip wire ends to the specified length for cage clamp terminals
3. Insert a flat-blade screwdriver into the actuation slot to open the cage
4. Insert the stripped wire fully into the terminal opening
5. Remove the screwdriver to allow the cage to clamp the wire securely
6. Perform a gentle tug test on each wire to verify retention

Selection Tips

• Select BMXFTB2000 for cage clamp termination with 20-pin X80 modules
• For screw clamp applications with larger wire capacity, choose BMXFTB2010
• For spring clamp alternatives, select BMXFTB2020
• Confirm module compatibility with 20-pin removable terminal blocks
• Stock spare terminal blocks to reduce maintenance turnaround time