TC-RPCXX1 | Honeywell Redundant Power Supply Module 85-265 VAC

Product Overview

The TC-RPCXX1 is a redundant power supply module designed for Honeywell C200 controllers and I/O chassis. It accepts wide-range AC input and provides reliable backplane power with automatic failover capability.

Key Features

• Wide input range 85–265 VAC
• Supports redundant configuration with chassis adapter
• LED status indicators for power and fault
• Surface-mounted within 3 feet of the chassis
• Compatible with Series A chassis

Technical Specifications

• Input Voltage Range: 85–265 VAC
• Frequency Range: 47–63 Hz
• Maximum Inrush Current: 20 A
• Output: Regulated voltages for backplane (including 5.1 V, 24 V)
• Mounting: Surface mount near chassis
• Compatible Adapter: TC-RPSCA2

FAQ

• What chassis does it support? C200 and compatible I/O chassis (Series A models rated for the power capacity).
• Is a chassis adapter required? Yes, TC-RPSCA2 is used for redundant configurations.
• Can it be hot-swapped? Designed for high-availability systems with proper procedures.

Installation Guide

1. Mount the power supply within 3 feet of the target chassis.
2. Install the TC-RPSCA2 chassis adapter on the left side of the chassis.
3. Connect the redundant power cables according to the installation guide.
4. Wire the AC input sources and annunciation contacts if used.
5. Power up and verify status LEDs and system power health.

Selection Tips

• Select for systems requiring power redundancy.
• Confirm chassis model compatibility and power rating.
• Pair with the matching chassis adapter TC-RPSCA2.