Yokogawa F3XD32-3F DC Input Module XD32-3F

Product Overview

The Yokogawa F3XD32-3F is a 32-point DC input module for the FA-M3 series, providing high-density digital input acquisition in a single slot. It accepts 24V DC signals with sink/source compatibility and photocoupler isolation, making it ideal for applications requiring many digital inputs in a compact footprint, such as sensor arrays, switch panels, and status monitoring systems.

Key Specifications

• Input Type: DC voltage (sink/source compatible)
• Number of Inputs: 32 points
• Rated Input Voltage: 24V DC
• Input Impedance: 20 kΩ
• Isolation: Photocoupler isolation
• Response Time: Standard (suitable for general-purpose digital input)
• Current Consumption: Powered via FA-M3 backplane
• Operating Temperature: 0 to 55°C
• Storage Temperature: -20 to 75°C
• Weight: 180 g

Compatibility & Applications

Compatible with all FA-M3 base modules and CPUs. Ideal for 32-point sensor arrays, machine status monitoring, conveyor limit switch banks, safety mat inputs, and high-density digital input panels where space efficiency is critical.

FAQ

• Q: What is the difference between F3XD32-3F and F3XD16-3F? A: F3XD32-3F provides 32 inputs in one slot versus 16, doubling I/O density and reducing per-point cost.
• Q: Is sink/source wiring selectable? A: Yes, the module supports both sink (NPN) and source (PNP) sensor configurations.
• Q: Can I use it with 12V DC sensors? A: F3XD32-3F is optimized for 24V DC. For 12V applications, verify sensor compatibility or consider F3XD16-3N.
• Q: What terminal block does it use? A: The module typically uses a 40-pin connector for high-density wiring; verify connector compatibility.

Installation Guide

1. Power off the FA-M3 system.
2. Insert F3XD32-3F into any available I/O slot.
3. Connect 24V DC sensors using the appropriate 40-pin connector or terminal block.
4. Configure sink or source wiring based on your sensor output type.
5. Restore power and test all 32 inputs using WideField3 monitor function.
6. Label each input channel for future maintenance and troubleshooting.

Selection Tips

• Use F3XD32-3F for high-density 24V DC input applications to minimize module count.
• For 16-point applications, F3XD16-3F offers lower cost with the same specifications.
• For 64-point maximum density, consider F3XD64-3N if available for your system.
• Ensure your sensor power supply can support the total current draw of all 32 sensors.