Yokogawa F3YD64-1P Transistor Output Modules - 64-point

Product Overview

The Yokogawa F3YD64-1P is a 64-point sink-type transistor output module for the FA-M3 series, designed for high-density digital output applications. With 8 points per common and photocoupler isolation, it delivers fast, reliable switching of 24V DC loads at 0.1A per point. Built-in short-circuit protection and active clamp surge protection ensure robust operation in demanding industrial environments.

Key Specifications

• Output Type: Transistor contact (sink type, NPN)
• Number of Points: 64
• Common Line Type: 8 points per common
• Rated Load Voltage: 12 to 24V DC (10.2 to 26.4V DC operating range)
• Maximum Load Current: 0.1A per point, 0.4A per common
• Response Time: OFF→ON: 1 ms max; ON→OFF: 1 ms max
• ON Voltage: 0.5V DC max
• Off-State Leak Current: 0.1 mA max
• Isolation: Photocoupler isolation, 1500V AC withstand
• Protection: Short-circuit protector, overheat shutdown, active clamp surge protector
• Current Consumption: 275 mA at 5V DC
• External Power Supply: 12-24V DC, 95 mA
• Connection: Two 40-pin connectors
• Weight: 130 g

Compatibility & Applications

Compatible with all FA-M3 base modules. Ideal for high-density solenoid valve manifolds, LED indicator panels, small relay driving, distributed I/O systems, and high-speed production machinery requiring 64 outputs in a single slot.

FAQ

• Q: What is the maximum current per common? A: 0.4A per common (8 points), so total module load should not exceed 3.2A (8 commons × 0.4A).
• Q: Does it have short-circuit protection? A: Yes, each output group has short-circuit protection with automatic shutdown on fault detection.
• Q: What connectors are required? A: The module uses two 40-pin connectors (typically Fujitsu FCN-707 series or equivalent).
• Q: Can I drive relays directly? A: Yes, for small 24V DC relays, but ensure coil current does not exceed 0.1A per point.

Installation Guide

1. Power off the FA-M3 system and external 24V supply.
2. Insert F3YD64-1P into any available I/O slot.
3. Connect 40-pin ribbon cables or pre-wired harnesses to the module connectors.
4. Apply external 12-24V DC power to the module power terminals.
5. Restore power and test outputs using ladder logic or WideField3 monitor function.
6. Verify short-circuit protection by intentionally overloading one point (briefly) to test shutdown.

Selection Tips

• Choose F3YD64-1P for maximum output density (64 points) in a single FA-M3 slot.
• For 32-point applications, F3YD32-1P offers similar specifications with lower cost.
• For higher current per point (1A), use F3YD08-6A (8 points) instead.
• Ensure your external power supply can provide 95 mA module power plus total load current.